Pilates Cadillac Reformer

Pilates Reformer Cadillac Combo Machines

Reformer carriage and full canopy in one frame, for a studio or home.

Standalone Cadillac Pilates Machines and Trapeze Tables

Full canopy on a fixed padded table, no sliding carriage — the pick if you already own a reformer.

Every Cadillac reformer includes a push-through bar, roll-down bar, and trapeze bar. None of them fold, these are semi-permanent machines that stay assembled once installed, so measure your space before you order.

Which Cadillac Reformer Is Right for You?

Teaching privately from a home or garage studio with a residential ceiling?

Choose the BASI Systems Pilates Cadillac Reformer Combo ($11,900), whose canopy stands 76.7 in (195 cm) — low enough to give you room to spare in most residential rooms. Two tradeoffs, both real: at 107.3 × 28.5 in (272.5 × 72.5 cm) it's a long machine, and at nearly double the price of every other combo it's a studio-grade investment for a home room. If your ceiling has a few inches to give, the Elina Elite Cadillac-Reformer ($5,995) does the same job for half the money with 43.3 in (110 cm) of carriage travel and a 198.4 lb (90 kg) hanging-load rating, though its 85.8 in (218 cm) canopy needs the headroom.

Rehab, physio, or chiro clinics doing assisted transfers?

Choose the Elina Pilates Cadillac Trapeze Table ($3,995), the least expensive Pilates Cadillac in the range, with a bed at 23.2 in (59 cm) that makes getting a patient down and back up noticeably easier. The tradeoff is a tall canopy at 94.5 in (240 cm), so check your ceiling first. If you need capacity figures in writing, the Merrithew Cadillac Trapeze Table ($4,999) states both: 350 lb (159 kg) user weight and 200 lb (91 kg) hanging load.

A home practitioner with no reformer yet, moving one machine through a door and up stairs?

Choose the Private Pilates Premium Combo Cadillac Reformer ($5,999), the lightest combo Cadillac reformer at 269 lb (122 kg), meaningfully easier to get inside than the 386–419 lb (175–190 kg) alternatives. It comes in two factory builds, so you pick the one that suits your room: the Short frame stands 85 in (215 cm) overall with a 15 in (39 cm) bed, the Long frame 88.5 in (225 cm) with a 25 in (64 cm) bed, both measured to the top of the canopy. If getting it through the door isn't the hard part, the Elina Cadillac Reformer ($5,250) is the least expensive Cadillac reformer combo and runs separate spring sets for bed and trapeze — 6 and 8, in short and long lengths — so you're not recombining springs every time you switch apparatus. A jump table and box are included.

A boutique studio owner with one open bay?

The Private Pilates Premium Combo ($5,999) again, at 93 × 31 in (237 × 80 cm) the smallest footprint of any Pilates reformer Cadillac combo, with the Short build clearing a standard 8 ft ceiling and the Long build's 25 in (64 cm) bed sitting at a more comfortable working height for instructors. If your constraint is turnaround rather than floor space, the Fitkon Combo Cadillac-Reformer ($6,629) has a tool-free gear bar with individual settings, so you reset between back-to-back clients without hunting for hardware.

Running an instructor-training or certification program that teaches the complete classical repertoire?

Choose the BASI Systems Pilates Cadillac Reformer Combo  ($11,900), the only Cadillac Pilates reformer with a fourth operating mode — a raised mat platform via the Twin Mat Conversion, on top of the reformer, reformer-with-tower, and full-Cadillac modes every combo offers. Four modes in one frame against three elsewhere, with that 107.3 in (272.5 cm) length and the price as tradeoffs. If your program needs the deepest kit rather than the fourth mode, the Activemine Combo Cadillac ($6,699) ships with 15 springs in 6 grades, 22 carabiners, a mat converter, and a bounce board — enough resistance range to teach a full cohort without swapping hardware, at roughly $5,200 less per machine.

Want a frame that's metal rather than wood?

Choose the Elina Pilates Classic Aluminium Cadillac ($4,990), the only all-metal Cadillac Pilates machine in the range, built in stainless aluminum and galvanized steel where every other frame is wood or a wood hybrid. It's also the narrowest machine at 86.6 × 26.8 in (220 × 68 cm), shipping with 10 springs: two light arm, two medium leg, two push-through, two roll-down, and two trapeze. Prefer the warmth of wood? The Private Pilates Wood Cadillac ($4,299) is the fully wood-cased alternative, and $691 less. 

Already own a reformer and just want to add Cadillac and trapeze work?

Choose the BASI Systems Pilates Cadillac Trapeze Table ($7,750), where 12 springs across 6 grades give you the finest resistance control of the standalone tables, and three leg heights make it the only reformer with trapeze whose working height you can change. That range also solves ceiling problems: the canopy sits at 71.7 in (182 cm) on the standard frame and 87.2 in (221.4 cm) with the tall extension legs, on a 107.3 × 28.5 in (272.5 × 72.5 cm) footprint. It's the most expensive standalone, so if that's more than you want to spend, the Fitkon Trapeze Table ($4,999) costs $2,751 less and lets you adjust the push-through bar and trapeze mid-session without stopping to reset.

What a Pilates Cadillac Does That a Reformer Can't

A Cadillac gives you suspended stretching, joint decompression, and inversions — work that needs an overhead frame to hang from or press up into. A standard Reformer moves you horizontally on a sliding carriage, springs pulling in one plane. The canopy, push-through bar, and roll-down bar add every other plane: hanging, standing, and spinal articulation you can't reach lying down.

A Reformer with Tower sits between the two, adding a half-frame at one end of the carriage. That covers some standing and vertical work, but the frame only reaches over part of the bed, so there's no hanging, no inversions, and no room to work along the full length. A Cadillac's four posts span the whole table, which is what makes the difference — and what makes it the largest machine of the three.

So the question is how central vertical work is to your practice. If it's occasional, a Tower handles it in less space. If it's the point, only a Cadillac reaches.

Combo Cadillac Reformer or Standalone?

Buy the combo if you don't own a Reformer, the standalone if you do. A combo Cadillac reformer builds a sliding carriage into the same frame, so you get both apparatus in one footprint for less than buying them separately. A standalone Cadillac Pilates machine or Trapeze Table skips the carriage entirely and costs less because of it — standalone tables start at $3,995 against $5,250 for the cheapest combo.

Either way, you don't need Cadillac experience to start. The same springs that make advanced hanging work possible also assist you while you're learning, so the push-through bar supports your first session and loads it once you're stronger. The machine doesn't need replacing as you progress, which is the argument for buying the full apparatus now rather than something smaller you'll outgrow.

Running a studio with back-to-back classes? Commercial Pilates reformers are built for that volume.

Why Buy From Pilates Matters

Every manufacturer's website recommends its own machine. We're an authorized retailer for all six brands, so the one we point you toward is the one that fits your ceiling, your floor, and your budget — not the only one we carry. If a model is backordered or turns out wrong for your room, we can move you to an equivalent from another brand instead of sending you back to square one.

And when you need help, you get a person. Order questions, delivery scheduling, freight damage — we handle it directly, without waiting days for a manufacturer's support line to work out whose problem it is.

FAQ

What is a Pilates Cadillac reformer?

A Pilates Cadillac reformer is a raised, padded table with a four-post canopy built over it, hung with springs, a push-through bar, a roll-down bar, and a trapeze. Joseph Pilates developed the original design, and the canopy is what separates it from every other piece of Pilates equipment — you can work lying down, sitting, standing, or hanging from the frame.

It comes in two configurations. A combo Cadillac reformer adds a sliding carriage to that frame, giving you both machines in one footprint. A standalone Cadillac trapeze table has a fixed table top instead, so it does the Cadillac work only.

What are the parts of a Cadillac Pilates reformer?

A Cadillac Pilates reformer has a frame built from a padded base, four uprights, and horizontal rails overhead. Those rails carry an eyebolt grid where springs hook on at different heights, plus the trapeze bar. The push-through bar mounts between the uprights and loads from the top or the bottom depending on whether you want the springs assisting or resisting you. A roll-down bar handles spinal articulation, and safety straps and chains limit how far the push-through bar and trapeze travel.

On a Pilates reformer Cadillac combo, a sliding carriage runs on rails along the base with shoulder rests, an adjustable headrest, and a footbar. Reformer springs anchor to a gear bar underneath, and ropes run through pulleys on risers mounted to the uprights. A padded mat converter drops over the carriage to switch the machine into Cadillac mode. Springs are color-coded by tension throughout, so you tune resistance by swapping and combining rather than adjusting one dial.

Should I buy a reformer Cadillac combo or a standalone Cadillac trapeze table?

Buy the reformer Cadillac combo if you don't already own a Reformer — it gives you both machines in one footprint for less than buying them separately. If you do own one, buy the standalone Cadillac trapeze table and skip paying for a second carriage.

How much does a Pilates Cadillac machine cost?

A Pilates Cadillac machine costs between $3,995 and $11,900, from the Elina Cadillac Trapeze Table to the BASI Systems Reformer Combo. Standalone trapeze tables run $3,995 to $7,750, and combo Cadillac reformers $5,250 to $11,900.

What is the canopy height on a Cadillac reformer, and does it affect ceiling clearance?

Canopy height is the floor-to-top measurement of the frame, and yes, it's the main thing that determines whether a Cadillac reformer fits your room. Models range from 71.7 in (182 cm) to 94.5 in (240 cm), and most manufacturers recommend a minimum ceiling of 8 to 9 ft (2.4 to 2.7 m), since you need clearance above the canopy for hanging work rather than just enough to fit the frame. Measure before ordering, and call us if you're close.

Can a complete beginner use a Cadillac Pilates machine safely?

Yes, a beginner can start on a Cadillac Pilates machine without prior experience. The same springs that make advanced hanging work possible also provide assistance while you're learning, so exercises scale from a first session upward. Work with an instructor for the first few sessions to learn the push-through bar, roll-down bar, and trapeze — the suspended work in particular is easier with someone spotting than from a video.